DIRECTED ENERGY PROFESSIONAL SOCIETY


SSDLTR Detailed Technical Program
2-5 June 2008 Albuquerque, New Mexico

Plenary Session   Diode Lasers I   HPL (Open)   Power & Thermal   HPL (FOUO)

Diode Lasers II   Poster Papers   Visible Lasers   Bulk Solid-State Lasers   Fiber Lasers I

Beam Control   Diode Lasers III   Fiber Lasers II   Mid-Infrared Lasers  

Technical Program
Changes in the program since printing are shown in red below

Tuesday, 3 June 2008 (Morning)
0800-1000 Plenary Session: Chair: Iain McKinnie, Kapteyn-Murnane Laboratories, Inc
  Introduction
Iain McKinnie, Kapteyn-Murnane Laboratories, Inc
  Technical Breakthroughs of Solid-State Lasers: Past and Future
Robert Byer, Stanford University
  Perspectives on High Power Solid-State Lasers: Past, Present, and Future
Mark Neice, High Energy Laser Joint Technology Office
  Poster Session Overview
Sean Ross, Air Force Research Laboratory
1000-1030 Break
1030-1230 Plenary Session Continued
  Outlook for Lower SWaP High Energy Lasers
Martin Stickley, Consultant
  Laser Processing of Microelectronics: Historical Trends and Future Challenges
Brian Baird, ESI
  Solid-State Lasers for Space: Past, Present, and Future Perspectives
Bernie Seery, NASA GSFC
1230-1400 Lunch & Keynote Address
1300-1345 Keynote Address: Ultracold Matter and the Atom Laser
Dana Z. Anderson, JILA, University of Colorado
Tuesday, 3 June 2008 (Afternoon)
1400-1520 Diode Lasers I: Chair: Paul Rudy, Quintessence Photonics Corp
  Integration Aspects of Fiber and Diode Laser Systems
Tim Lauterborn, Fraunhofer USA, Inc
  Progress in Fiber Coupled, High Brightness, High Power Diode Laser Pump Sources
Kirk Price, nLight Corporation
  High Brightness Single Mode and Multimode Semiconductor Lasers in the Visible, Near-Infrared and Eye-Safe Regime
K.K. Law, QPC Lasers, Inc
  Efficiency Limiting Processes in Infrared Semiconductor Diode Lasers
Stephen Sweeney, Arizona State University
1520-1600 Break
 
Tuesday, 3 June 2008 (Afternoon)
1600-1730 High Power Lasers (Open): Chair: Dave Mordaunt, Northrop Grumman
  Invited: High Power DPSSLs in the Green and UV Spectral Range - State-of-the Art and Outlook
Henry Pang, Coherent Inc.
  2.3-kW Continuous Operation Cryogenic Yb:YAG Laser
Jason Brasseur, Directed Energy Solutions
  6kW CW Single Mode Ytterbium Fiber Laser in All-Fiber Format
Dennis Gapontsev, IPG Photonics
  1 kW Re-Imaging Waveguide MOPA
Micah Boyd, Lockheed Martin Coherent Technologies
 
Tuesday, 3 June 2008 (Afternoon)
1400-1520 Power & Thermal: Chair: Pete Cologer, ATK Space
  Mechanical Properties of Van der Waals Adhesive-Free Bond (AFB®) Optical Composites
H. C. Lee, Onyx Optics, Inc.
  A Compact Laser Current Source for Vehicle Mounted Laser Weapon Systems
David Prestel, Northrop Grumman
  Advanced Thermal Energy Storage Techniques for High Powered Solid State Laser Systems
Dan Rini, Rini Technologies
  Multi-Evaporator Hybrid Two-Phase Loop Cooling System for Solid-State Lasers
David Bugby, ATK Space
1520-1600 Break
1600-1730 Power & Thermal (Continued)
  Ceramic Microchannel Coolers for Laser Diode Arrays
Ed Stephens, Northrop Grumman Cutting Edge Optronics
  Low Temperature Spray Cooling for Cryogenic Laser Systems
Dan Rini, Rini Technologies
  Mechanically Pumped Two-Phase System With Multiple Compact Evaporators
Dmitry Khrustalev, ATK Space Division
  Lightweight and Compact Thermal Management System for Solid-State High-Energy Laser
John Vetrovec, Aqwest, LLC
 
Wednesday, 4 June 2008 (Morning)
0800-1000 High Power Lasers (FOUO): Chair: Dave Mordaunt, Northrop Grumman
  J-HPPSL Nd:YAG Ceramic ThinZag Laser Program
Alex Mandl, Textron
  Joint High Power Solid State Laser Program Update
Jay Marmo, JHPSSL3
  Integrated Solid State Laser Testbed
Sean Ross, Air Force Research Laboratory
  Strategic Illuminator Laser (SILL) Brassboard Performance Characterization
Hagop Injeyan, Northrop Grumman Corporation
  Scaling High Power Thin Disk Lasers
Sean Ross, Air Force Research Laboratory
  Comparison of Spectral Beam Combining Approaches for High Power Fiber Laser Systems
Eric Honea, Aculight Corporation
1000-1030 Break
1030-1210 High Power Lasers (FOUO - Continued)
  Exploration of Performance Limits of Fiber Laser Technology for Directed Energy Applications
Ken Dzurko, SPI Lasers LLC
  Gas-Cooled Disk Laser (GCDL)
John Vetrovec, Aqwest, LLC
  Boeing Development of the Re-deployable High Energy Laser System (RHELS)
Ronald Dauk, Boeing-SVS, Inc
  AFRL’s Materials Efforts: Enabling Improved Laser Systems
F. Kenneth Hopkins, Air Force Research Laboratory
  Rugged, High-Performance Nd:YAG Slab Oscillators and Amplifiers
Van Rudd, Lockheed Martin Coherent Technologies
1210-1340 Lunch & Poster Paper Session
 
Wednesday, 4 June 2008 (Morning)
0800-1010 Diode Lasers II: Chair: Martin Stickley, Consultant
  Invited: Research Activities in the German National Funding Initiative BRIOLAS
Friedrich Bachmann, ROFIN-SINAR Laser GmbH
  Highly Efficient Diode Laser Bars for CW and Quasi-CW Operation
Rolf Kojima, Osram Opto Semiconductors Inc.
  High Power - High Brillance 9xx nm Diode Laser Bars
Ralf Hulsewede, JENOPTIK
  Solder Packaging of Optics for High Power Diode Laser Systems
Erik Beckert, Fraunhofer
  High-Power Laser Diode Bars and Arrays for Pumping of High Energy Solid State Lasers
Nels Ostrom, Coherent Direct Diode Systems
  Spectrally Narrowed, Wavelength-Stabilized, High-Efficiency and High-Brightness Diodes for Precision Pumping
Manoj Kanskar, Alfalight Inc
1010-1040 Break
1040-1200 Diode Lasers II (Continued)
  Diode-Laser Modules for Pumping of Rubidium Lasers
Trevor Crum, Spectra-Physics Lasers
  High-Power Distributed Bragg Reflector Lasers
Gary Evans, Photodigm, Inc
  Low Noise 880nm Diode Pumps for Improved Solid State Laser Performance
Vivek Agrawal, Coherent Inc.
  Improvements in Microchannel-Cooled High-Efficiency 885-nm Diode Laser Bars
Paul Leisher, nLight
1210-1340 Lunch & Poster Paper Session
 
Wednesday, 4 June 2008 (Lunch)
1210-1340 Poster Paper Session: Chair: Sean Ross, Air Force Research Laboratory
  Cavity-Mode Analysis of Northrop-Grumman Passive Beam-Combining Experiments
Erik Bochove, Air Force Research Laboratory
  Pump Fluctuation Effects on Spatiotemporal Phase Stability of Fiber Amplifier
Erik Bochove, Air Force Research Laboratory
  Statistics of Filamentation in Semiconductor Broad Area Emitters
Jerome Moloney, University of Arizona
  High Roll-Over Power from 793 nm and 962 nm Asymmetric Epitasial Laser Structures with Optical Trap
Iulian Petrescu-Prahova, Intense HPD
  Spectral Beam Combining of Fiber Lasers with Automatic Wavelength Control
Oleksiy Andrusyak, University of Central Florida
  Aerosol Techniques for the Fabrication of HOM Fiber Lasers
Robert Chivas, Boston University
  Large Aperture Chirped Bragg Gratings in PTR Glass for High Energy fs Pulse Stretching and Compression
Vadim Smirnov, OptiGrate, Inc
 
Wednesday, 4 June 2008 (Afternoon)
1340-1500 Visible Lasers: Chair: Kalin Spariosu, Raytheon
  The Starfire Optical Range Sodium Guidestar Fasor
Craig Denman, Air Force Research Laboratory
  System Overview and Details of High-Power 589 nm Guidestar Lasers
Neil Vanasse, Lockheed Martin Coherent Technologies
  High-Power, Versatile Waveform Generation at 1319 nm in a Solid-state Waveguide-based MOPA System
Nick Swaruk, Lockheed Martin Coherent Technologies (Speaker change)
  Quantum Design and Demonstration of a Yellow Orange OPSL
Jerome Moloney, University of Arizona
1500-1530 Break
 
Wednesday, 4 June 2008 (Afternoon)
1530-1730 Bulk Solid-State Lasers: Chair: Kalin Spariosu, Raytheon
  Optimized Design of Nd Transverse Doping Profiles in Transparent YAG Ceramics for Edge-Pumped Laser Geometries
Bob Byer, Stanford University
  Synthesis and Properties of Eye-Safe Single Crystal, Ceramic, and Optical Fiber Sources
Colin McMillan, Clemson University
  Yb:Y2O3 Ceramic Lasers (withdrawn)
Jas Sanghera, Naval Research Laboratory
  Efficient 100 kHz Repetition Rate Ultrafast Laser System with OPA/NOPA Frequency Conversion
Iain McKinnie, Kapteyn-Murnane Laboratories, Inc
  Towards Temperature Independent Er:Glass Lasers
William Hageman, University of Central Florida
  Lowest Quantum Defect Er-Doped Laser
Mark Dubinskii, Army Research Laboratory
 
Wednesday, 4 June 2008 (Afternoon)
1340-1500 Fiber Lasers I: Chair: Shawn Redmond, Aculight
  Efficient, High-Power Tm-Doped Silica Fiber Lasers
Kevin Wall, Q-Peak, Inc
  60W of Average Output Power From a Pulsed Thulium-Doped Fiber Amplifier Operating at 2-microns
Daniel Creeden, BAE Systems
  Efficient and Reliable 790nm-Pumped Tm Lasers from 1.91 to 2.13µm
G. Frith, Nufern
  High-Power Fiber-Based Green Laser with Diffraction-Limited Output Beam
Dan Hu, Aculight Corporation
1500-1530 Break
1530-1730 Fiber Lasers I (Continued)
  Monolithic, Turn-Key, 1kW Yb-Doped Fiber Master Oscillator Power Amplifier
John Edgecumbe, Nufern
  Towards 10s of kW Fiber Lasers Based on PCF Technology
Peter Skovgaard, Crystal Fiber A/S
  Single-Mode Chirally Coupled Core Yb-doped Fiber Lasers and Amplifiers for High Power Scaling
Craig Swan, University of Michigan
  Characterizing Higher-Order-Modes Propagating in Large-Mode-Area Fibers
J.W. Nicholson, OFS Laboratories
  Magnetic Quasi-Phase Matching for Optical Isolation in High-Power Fiber Amplifiers
Gerald Moore, Air Force Research Laboratory
  Mode Formulation of an N+1-core Evanescently Coupled Fiber Laser Resonator
Erik Bochove, Air Force Research Laboratory
 
Thursday, 5 June 2008 (Morning)
0800-1000 Beam Combination & Control: Chair: Steve Kurti, NAVAIR
  Active Phasing of Fiber Amplifier Arrays using LOCSET
Tom Shay, Air Force Research Laboratory
  Re-Imaging Assisted Phased Array in a 2-Dimensional Hollow Waveguide
Andrew Bratcher, Lockheed Martin Coherent Technologies
  Power Scaling a Coherent Laser Array Using a Self-Fourier Cavity
Christopher Corcoran, Corcoran Engineering, Inc
  Phase Locking of Three GCSELs Array by a Spatially Profiled Volume Bragg Grating
Leonid Glebov, University of Central Florida
  Efficient All-Fiber Passive Coherent Combining of Fiber Lasers
Baishi Wang, Vytran LLC
  Dynamic Characteristics of Passively Phased Fiber Amplifiers Arrays
Sami Shakir, Northrop Grumman
1000-1030 Break
1030-1230 Beam Combination & Control (Continued)
  Spatial-Dispersion-Free Spectral Beam Combining of High Power Pulsed Yb-doped Fiber Lasers
Kai Chung Hou, University of Michigan
  Fiber Laser System with kW-Level Spectrally-Combined Output
Oleksiy Andrusyak, University of Central Florida
  Rapid Beam Shaping and Focussing Using Tunable Acoustic Gradient Index Lenses
Craig Arnold, Princeton University
  Atmospheric Propagation of a Beam from a Bundle of Partially-Coherent Fiber Lasers of Good Beam Quality
Fassil Ghebremichael, Lockheed Martin Space System Company
  Incoherent Combining of High-Power Fiber Lasers For Directed Energy Applications
Phillip Sprangle, Naval Research Laboratory
  Coherent Multicore Fiber Laser Array
Frederic Durville, Optical Fiber Systems, Inc
1230-1330 Lunch
 
Thursday, 5 June 2008 (Morning)
0800-1000 Diode Lasers III: Chair: Friedrich Bachmann, ROFIN-SINAR
  Conduction Cooled Multi-kW QCW Diode Laser Arrays with Low Operating Current
Jihua Du, Coherent Inc
  Power Beaming with Diode Lasers
Tobias Koenning, DILAS Diode Laser, Inc
  QWI Enabled QCW High Power 808 nm Laser Diode Arrays
Valentín Loyo-Maldonado, Intense Limited
  Reliability of High-Performance Semiconductor Laser Diodes in the 800-1000nm Wavelength Band
Erik Zucker, JDS Uniphase Corporation
  Coherently Combined High-power Intelligent Semiconductor Emitters (COCHISE)
George Turner, MIT/Lincoln Laboratory
  High-Reliable qcw Pump Laser Stacks
Eckard Deichsel, JENOPTIK
1000-1030 Break
1030-1230 Diode Lasers III (Continued)
  Vertical-Cavity Surface-Emitting Laser Arrays for High-Power Applications
Chuni Ghosh, Princeton Optronics
  Design and Manufacturing of High Efficiency, Fiber Coupled Single Emitter Arrays with >350W from a 200mm Fiber, NA=0.2
Stefan Heinemann, Fraunhofer USA, Inc
  Fiber-Coupled Diode-Laser Bars Optimized for High Brightness Applications
S. David Roh, Coherent, Inc
  Highly Reliable, High Brightness, Compact Pump Module
Ed Wolak, Newport Corp
  Novel High Power Monolithic CW Arrays
P. Thiagarajan, Lasertel Inc
  Progress in Long-Wavelength High-Power Diode Laser Pump Sources
Paul Leisher, nLight Corporation
1230-1330 Lunch
 
Thursday, 5 June 2008 (Afternoon)
1330-1450 Fiber Lasers II: Chair: Daniel Creeden, BAE Systems
  SBS Thresholds for a Single-Frequency Fiber Amplifier with a Thermal Gradient: Co-Pumped and Counter-Pumped Systems
Thomas Shay, Air Force Research Laboratory
  SBS Mitigation with ‘Two-Tone’ Amplification: A Theoretical Model
T. Justin Bronder, Air Force Research Laboratory
  Continuous Wave Stimulated Brillouin Scattering Phase Conjugation in Step-Index Optical Fiber
Steven Massey, Air Force Institute of Technology
  Single-Frequency Photonic Crystal Fiber Amplifier with 220 W Output Power
Christopher Vergien, Air Force Research Laboratory
1450-1520 Break
1520-1620 Fiber Lasers II (Continued)
  100 W Femtosecond Yb-Fiber CPA System based on Chirped-Volume-Bragg-Gratings
Guoqing Chang, University of Michigan
  Eye-Safe Ultrafast Fiber Lasers and Laser Systems Based on Short and Heavily Doped Phosphate-Glass Fiber
Pavel Polynkin, Polar Laser Laboratories
  Higher Order Mode Amplifiers
C. Headley, OFS Laboratories
 
Thursday, 5 June 2008 (Afternoon)
1330-1500 Mid-Infrared Lasers: Chair: Ramesh Shori, NAVAIR
  New Frontiers of Cr2+ and Fe2+ Doped II-VI Mid-IR Lasers
Sergey Mirov, University of Alabama
  OPGaAs Materials
Pete Schunemann, BAE Systems
  OPGaAs Applications (withdrawn)
Pete Budni, BAE Systems
1500-1530 Break
1530-1630 Mid-Infrared Lasers (Continued)
  MIR Lasers
Eric Honea, Aculight Corp
  Fiber Based Mid-IR Sources and Applications (withdrawn)
Jas Sanghera, Naval Research Laboratory

 
Copyright 2008 Directed Energy Professional Society   DHTML/JavaScript Menus by OpenCube

Last updated: 3 June 2008